Vlog 75: Water Works
Having replaced the sink in the new worktop, I needed to sort out the sink outlet for waste water and the supply pipe from the main tank. This proved irritatingly troublesome, as you will see!
Tales of a bloke with a campervan
Having replaced the sink in the new worktop, I needed to sort out the sink outlet for waste water and the supply pipe from the main tank. This proved irritatingly troublesome, as you will see!
You’re killing me with these cliffhangers!
Haha sorry!
hi David. Good video as always.
If i may offer suggestions.
No1. Test the bottom of your pans with a neodynium magnet. If they stick there is iron in them and are induction compatible.
No 2. Try ptfe tape around any loose/slack fittings
No 3. The venturi effect will come into play with your diesel can/handle/breathing hole. Solution, sticky plaster/cotton wool ball over the hole.
Cheers!
if a magnet sticks to the ridge monkey it will work with the induction top.
Thank you