Tales of a bloke with a campervan
This is part 2 of a project to remove all gas (propane) from my self-built campervan and replace it with a lithium battery system with induction cooktop and diesel heater. In this part, I take out the gas pipes and remove the hob & sink as well as the Propex heater unit.
Continue reading
I mentioned in a recent video that I was going to test whether the new “acoustic ducting” from Propex would really reduce noise levels of the HS2000 propane (LPG) heater in the van, plus I wanted to point my infra-red temperature sensor at the exhaust pipework to see how hot it really gets as it wends its way from the heater to the outside of the van, so in this video I do both those things.
Continue reading
Having tested the Propex HS2000 propane heater in my DIY campervan, I decided the exhaust was still rather hot despite having wrapped it in a heatproof material, so I added another layer of a different kind of exhaust wrap as well. This has made it very cool indeed where the exhaust pipe exits the van, which is a good thing because that’s quite near where the filler pipe is for the LPG tank.
Continue reading
An overview of the internal gas pipework I fitted to the campervan to run the Smev 9722 dual-burner hob and the Propex HS2000 heater, plus details of the 12V electrical system.
Continue reading
A video about installing a Propex HS2000 LPG heater into my DIY campervan. Rather than bolt it to the floor as most people do, mine ended up on a shelf above the nearside wheelarch, for reasons I explain in the video.
Continue reading
This was originally part of the last video but together than went on a bit too long hence me splitting it into two parts. In this then, I continue describing how I’m building the furniture for the campervan including a bed that is also a seating and storage area. Plus I show the water storage, gas locker and heater areas.
Continue reading