Vlog 16: Boing!

This was originally part of the last video but together than went on a bit too long hence me splitting it into two parts. In this then, I continue describing how I’m building the furniture for the campervan including a bed that is also a seating and storage area. Plus I show the water storage, gas locker and heater areas.

Products and tools used in my van build (affiliate links)
Heater unit: https://geni.us/Van_PropexHS2000
Fridge: https://geni.us/Van_CoolFreezeCDF26
Portable toilet: https://geni.us/Van_Toilet
Sink / hob: https://geni.us/Van_SinkHob
Inverter: https://geni.us/Van_Inverter
Mains charger: https://geni.us/Van_MainsCharger
Solar charger: https://geni.us/Van_SolarMPPT
DeWalt jigsaw: https://geni.us/Van_DeWaltJigsaw
DeWalt drill: https://geni.us/Van_DeWaltDrill
DeWalt mitre saw: https://geni.us/Van_DeWaltMitreSaw

Keep up to date via
Twitter: www.twitter.com/VandemoniumUK
Instagram: www.instagram.com/VandemoniumUK

If you enjoyed this video and fancy buying me a cuppa, you’re very welcome to pop along to www.paypal.me/CruisingTheCut with many thanks indeed (and of course, no pressure should you not wish to!)

4 Comments

  1. Jeremy Kessell

    You really do need to strap your water bottles in and not just leave them loose in the cupboard as it won’t be just breaking that makes the bottles move, cornering and general stopping and starting with water slopping about will cause movement!!

  2. As for the water tanks maybe raise the one tank 2-3cm for the wires and as for the door use a child proof latch, some are very small and flush and do hold well. If the water tanks are two close after in place then you may have to shim the section out a bit if only the opening that might be good as they will stay in place better. Great Vlog.

    • Unfortunately there’s no room to raise them because of the sink and pipes above but I’ve since bought a slimmer container for the waste water and this fits in nicely. Cheers!

Leave a Reply to admin Cancel reply

Your email address will not be published. Required fields are marked *