Vlog 49: The Throne Room

At long last, I made an upgrade to the site of the portable Dometic toilet in the campervan, giving it a dedicated space which is easily accessible both for use and for taking the toilet out for emptying. This finally frees up the space next to it for permanent storage too.

Products and tools used in my van build (affiliate links)
Heater unit: https://geni.us/Van_PropexHS2000
Fridge: https://geni.us/Van_CoolFreezeCDF26
Portable toilet: https://geni.us/Van_Toilet
Sink / hob: https://geni.us/Van_SinkHob
Inverter: https://geni.us/Van_Inverter
Mains charger: https://geni.us/Van_MainsCharger
Solar charger: https://geni.us/Van_SolarMPPT
DeWalt jigsaw: https://geni.us/Van_DeWaltJigsaw
DeWalt drill: https://geni.us/Van_DeWaltDrill
DeWalt mitre saw: https://geni.us/Van_DeWaltMitreSaw
DeWalt circular saw: https://geni.us/Van_DeWaltCircSaw

Keep up to date via
Twitter: www.twitter.com/VandemoniumUK
Instagram: www.instagram.com/VandemoniumUK

If you enjoyed this video and fancy buying me a cuppa, you’re very welcome to pop along to www.paypal.me/CruisingTheCut with many thanks indeed (and of course, no pressure should you not wish to!)

8 Comments

  1. Jeanine Pruszner

    Lovely job you did on your throne, but I would like to give you a small advise….as we had the same system in our caravan, over time the floor became damaged by scratches when sliding in and out. I put little felt stickers on the bottom of the loo. It slided even better, so this was my idea of the day, looking forward to all of your vlogs,I really enjoy them. Cheerio from Holland.

  2. Hi
    One thing you did not list was the work table , were did you get this please
    Great channel

  3. As usual a good DIY job well done David. Hope for some more videos on both boat and van to come. Tony, Johannenburg.

  4. You did an awesome job on this project David. You never cease to amaze me with your skills. I would never have thought to do the trick you pulled off with the pencil, to obtain the profile you needed to achieve, to get that plywood to fit tight against the wall of the van. Job well done !

Leave a Reply to Michael Higgins Cancel reply

Your email address will not be published. Required fields are marked *